Allied Telesis AT-S39 - Manual (Page 195)

AT-S39 Command Line Interface User’s Guide
195
MAC Address Table Commands
ADD SWITCH FDB
add switch fdb macaddress=macaddress port=port
Adds static unicast and multicast MAC addresses to the switch’s MAC
address table.
DELETE SWITCH FDB
delete switch fdb macaddress=macaddress
[vlan=name|VID]
Deletes dynamic and static unicast and multicast addresses from the
switch’s MAC address table.
SET SWITCH AGINGTIMER
set switch agingtimer=value
Sets the aging timer for the MAC address table.
SHOW SWITCH FDB
show switch fdb [address=macaddress] [port=port]
[status=static|dynamic|multicast] [vlan=name|VID]
Displays the dynamic and static unicast and multicast MAC addresses
stored in a switch’s MAC address table.
IGMP Snooping Commands
SET IP IGMP
set ip igmp [snoopingstatus=enable|disable]
[hoststatus=singlehost|multihost]
[timeout=timeout] [numbermulticastgroups=number]
[routerport=portnumber|auto]
Configures the IGMP snooping parameters.
SHOW IP IGMP
show ip igmp [hostlist|routerlist]
Displays the IGMP parameter settings, host nodes, and multicast router
ports.