Allied Telesis AT-S39 - Manual (Page 29)

AT-S39 Command Line Interface User’s Guide
29
PURGE IP
Syntax
purge ip [ipaddress] [netmask] [route]
Parameters
ipaddress Returns the switch’s IP address to the default setting
0.0.0.0.
netmask Returns the subnet mask to the default setting
255.255.0.0.
route Returns the gateway address to the default setting
0.0.0.0.
Description
This command returns the switch’s IP address, subnet mask, and default
gateway address to the default settings. This command is similar in
function to the RESET IP command. Where they differ is that with this
command you can specify which parameter to reset, while you cannot
with the RESET IP command.
Example
The following command returns the switch’s IP address and subnet
mask to their default values:
purge ip ipaddress netmask