Allied Telesis AT-S94 - Manual (Page 98)

Configuring DHCP Snooping
Page 98
Binding Addresses to the DHCP Snooping Database
The Binding Database Page contains parameters for querying and adding IP addresses to the DHCP Snooping
Database.
To bind addresses to the DHCP Snooping database:
1. Click DHCP Snooping > Binding Database. The Binding Database Page opens:
Figure 57: Binding Database Page
2. Define any of the following fields as a query filter:
Query Parameters
•
MAC Address — Indicates the MAC addresses recorded in the DHCP Database. The Database can be
queried by MAC address.
• IPv4 Address — Indicates the IPv4 addresses recorded in the DHCP Database The Database can be
queried by IPv4 address.
• VLAN — Indicates the VLANs recorded in the DHCP Database. The Database can be queried by VLAN.
• Interface — Contains a list of interface by which the DHCP Database can be queried. The possible field
values are:
– Unit No. and Port — Queries the VLAN database by a specific stacking member and port number.
– Trunk — Queries the VLAN database by trunk number.
• Type — Indicates the IP address binding type. The possible field values are:
– Static — Indicates the IP address is static.
– Dynamic — Indicates the IP address is dynamically defined by the DHCP server.
3. Click Query. The results appear in the Query Results table.