Allied Telesis AT-S94 - Manual (Page 155)

Configuring Multicast Forwarding
Page 155
3. Click Add. The Add Multicast Group Page opens:
Figure 102:Add Multicast Group Page
4. Select the VLAN ID.
5. Enter the Bridge Multicast MAC Address and the Bridge Multicast IPv4 Address.
6. Click Apply. The new Multicast group is saved and the device is updated.
To modify a Multicast group:
1. Click Modify. The Multicast Group Configuration Page opens:
Figure 103:Multicast Group Configuration Page
2. Define the fields.
3. Click Apply. The Multicast Group is saved and the device is updated.