Allied Telesis AT-S94 User Manual
Page 109
Configuring Ports
Aggregating Ports
Page 109
•
Flow Control — Displays the flow control status of the trunk.
•
LACP — Indicates if LACP is enabled on the trunk. The possible values are:
–
Enable — LACP is enabled on the trunk.
–
Disable — LACP is disabled on the trunk.
•
PVE — Enables a port to be a Private VLAN Edge (PVE) port. When a port is defined as PVE, it bypasses the
Forwarding Database (FDB), and forwards all Unicast, Multicast and Broadcast traffic to an uplink (except
MAC-to-me packets). Uplinks can be a GE port or another trunk. Traffic from the uplink is distributed to all
interfaces.
2.
Click Modify. The Trunk Setting Configuration Page opens:
Figure 65: Trunk Setting Configuration Page
The Trunk Setting Configuration Page contains the following fields:
•
Trunk— Lists the names of configured trunks.
•
Description — Provides a user-defined trunk description.
•
Type — Indicates the type of trunk.
•
Admin Status — Displays the link administrative status. Changes to the trunk state are active only after the
device is reset. The possible field values are:
–
Up — Indicates that the trunk is currently operating.
–
Down — Indicates that the trunk is currently not operating.