Allied Telesis AT-S94 User Manual
Page 179
Configuring SNMP
Page 179
To add an SNMP notification filter:
1.
Click the Add button. The Add SNMP Notification Filter Page opens:
Figure 124:Add SNMP Notification Filter Page
The Add SNMP Notification Filter Page contains the following fields:
•
Filter Name — Contains a list of user-defined notification filters.
•
Object ID Tree — Displays the OID for which notifications are sent or blocked. If a filter is attached to an OID,
traps or informs are generated and sent to the trap recipients. Object IDs are selected from either the Select
from List or the Object ID field. There are two configuration options:
–
Select from List — Select the OID from the list provided. Pressing the Up and Down buttons allows you
to change the priority by moving the selected subtree up or down in the list.
–
Object ID — Enter an OID not offered in the Select from List option.
•
Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap recipients.
–
Excluded — Restricts sending OID traps or informs.
–
Included — Sends OID traps or informs.
2.
Define the relevant fields.
3.
Click Apply. The SNMP Notification Filter is added to the list, and the device is updated.
4.
Click Save Config on the menu to save the changes permanently.