Allied Telesis AT-S94 - Manual (Page 216)

Viewing Statistics
Viewing Device Statistics
Page 216
Not approved by Document Control. For review only.
The Interface Statistics Page contains the following fields:
• Select the interfaces displayed in the table.
– Port — Specifies the port for which the interface statistics are displayed.
– Trunk — Specifies the trunk for which the interface statistics are displayed.
• Refresh Rate — Defines the frequency of the interface statistics updates. The possible field values are:
– 15 Sec — Indicates that the Interface statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Interface statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Interface statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Interface statistics are not refreshed.
Receive Statistics
•
Total Bytes (Octets) — Displays the number of octets received on the selected interface.
• Unicast Packets — Displays the number of Unicast packets received on the selected interface.
• Multicast Packets — Displays the number of Multicast packets received on the selected interface.
• Broadcast Packets — Displays the number of Broadcast packets received on the selected interface.
Transmit Statistics
•
Total Bytes (Octets) — Displays the number of octets transmitted from the selected interface.
• Unicast Packets — Displays the number of Unicast packets transmitted from the selected interface.
• Multicast Packets — Displays the number of Multicast packets transmitted from the selected interface.
• Broadcast Packets — Displays the number of Broadcast packets transmitted from the selected interface.
2. Select the Interface and the Refresh Rate. The selected interface’s Interface statistics are displayed.
To reset interface statistics counters:
1. Open the Interface Statistics Page.
2. Click Clear All Counters. The interface statistics counters are cleared.