Allied Telesis AT-S94 - Manual (Page 199)

Configuring Services
Page 199
• Interface — Displays the interface number.
• Default CoS— Determines the default CoS value for incoming packets for which a VLAN tag is not defined.
The possible field values are 0-7. The default CoS is 0. This field appears in the CoS Ports table.
• Restore Defaults — Restores the factory CoS defaults. The possible field values are:
– Checked — Restores the factory CoS defaults on the interface.
– Unchecked — Maintains the current CoS settings. This is the default value.
2. Select the interfaces.
3. Check the Restore Defaults option, where needed.
4. Click Modify. The CoS Configuration Page opens:
Figure 138:CoS Configuration Page
The CoS Configuration Page contains the following fields:
• Interface — Sets this CoS configuration for a port or trunk.
– Port — Defines CoS for a specific port.
– Trunk — Defines CoS for a specific trunk.
• Set Default User Priority — Indicates the priority level for CoS on the selected port/trunk. Default Priority
determines the default CoS value for incoming packets. The value range is 0-7 and the default is 0.
5. Select the Interface and the Priority level.
6. Click Apply. The CoS settings for the selected port/trunk are updated.
7. Click Save Config on the menu to save the changes permanently.