Allied Telesis AT-S94 - Manual (Page 89)

Configuring Device Security
Defining Access Control
Page 89
Adding ACE Rules
1. Click Network Security > IPv6 Based ACL. The IPv6 Based ACL Page opens.
2. Click the Add ACE button. The Add IPv6 Based ACL Page opens.
3. Define the fields.
4. Click Apply. The IPv6-based ACE rule is defined and the device is updated.
5. Click Save Config on the menu to save the changes permanently.
To modify the IPv6-based ACL configuration:
1. Click Network Security > IPv6 Based ACL. The IPv6 Based ACL Page opens.
2. Click Modify. The Add IPv6 Based ACL Page opens:
3. Define the fields.
4. Click Apply. The IPv6-based ACL configuration is defined, and the device is updated.
5. Click Save Config on the menu to save the changes permanently.