Allied Telesis AT-S94 - Manual (Page 131)

Configuring System Logs
Page 131
The Add Syslog Page contains the following fields:
• Description — Provides any additional information about the syslog server, for example its location.
• UDP Port — Defines the UDP port to which the server logs are sent. The possible range is 1-65535.
The default value is 514.
• Minimum Severity — Indicates the minimum severity level to be included in the log output. All logs that have
the severity higher than the minimum severity are also included in the output. When the minimum severity
level is defined, logs of all higher severity levels are selected automatically.
• Facility — Defines an application from which system logs are sent to the remote server. Only one facility can
be assigned to a single server. If a second facility level is assigned, the first facility is overridden. All
applications defined for a device utilize the same facility on a server. The field default is Local 7. The possible
field values are Local 0 - Local 7.
4. Define the fields.
5. Click Apply. The Log server is defined and the device is updated.