Allied Telesis AT-S94 - Manual (Page 85)

Configuring Device Security
Defining Access Control
Page 85
Adding ACE Rules
1. Click Network Security > IPv4 Based ACL. The IPv4 Based ACL Page opens.
2. Click the Add ACE button. The Add IPv4 Based ACE Page opens.
Figure 48: Add IPv4 Based ACE Page
3. Define the fields.
4. Click Apply. The IPv4-based ACE rule is defined and the device is updated.
5. Click Save Config on the menu to save the changes permanently.
To modify the IPv4-based ACL configuration:
1. Click Network Security > IPv4 Based ACL. The IPv4 Based ACL Page opens.
2. Click Modify. The Add IPv4 Based ACE Page opens:
3. Define the fields.
4. Click Apply. The IPv4-based ACL configuration is defined, and the device is updated.
5. Click Save Config on the menu to save the changes permanently.