Allied Telesis AT-S94 - Manual (Page 32)

Configuring Internet Protocol Version 6
Page 32
3. Click Add. The Add IPv6 Neighbor Page opens.
Figure 15: Add IPv6 Neighbor Page
4. Define the static IPv6 Address and MAC Address fields.
5. Click Apply. The IPv6 Neighbors entry is defined, and the device is updated.
To modify IPv6 Neighbor entries:
1. Click System > IPv6 Neighbors. The IPv6 Neighbors Page opens.
2. Select the IPv6 Address field to be edited.
3. Click Modify. The IPv6 Neighbor Configuration Page opens.
Notes
• Static IPv6 addresses require a MAC address whereas dynamic addresses are configured
automatically.
• Selecting the Dynamic option in the Type field, disables the fields and prevents reselecting the Static
option.
4. Define the MAC Address for the static IPv6 address.
5. Click Apply. The IPv6 Neighbor entry is modified and the device is defined.