Allied Telesis AT-S94 - Manual (Page 142)

Configuring Spanning Tree
Configuring Rapid Spanning Tree
Page 142
– Learning — Indicates the port is currently in the learning mode. The interface cannot forward traffic
however it can learn new MAC addresses
– Disabled — Indicates that STP is currently disabled on the port. The port forwards traffic while learning
MAC addresses.
3. Define the Interface, Point to Point Admin Status, and Activate Protocol Migration Test fields.
4. Click Apply. RSTP is defined for the selected interface, and the device is updated.
5. Click Save Config on the menu, to save changes permanently.