Allied Telesis AT-S94 - Manual (Page 177)

Configuring SNMP
Page 177
4. Click Apply. The notification recipient settings are saved and the device is updated.
5. Click Save Config on the menu to save the changes permanently.
To modify notification settings:
1. Click SNMP > Notify. The SNMP Notify Page opens.
2. Select an entry from one of the tables and click Modify. The SNMP Notify Configuration Page opens.
Figure 122:SNMP Notify Configuration Page
3. Define the fields.
4. Click Apply. The SNMP Notification configuration is modified, and the device is updated.
5. Click Save Config on the menu to save the changes permanently.