Allied Telesis AT-S94 - Manual (Page 161)

Configuring SNMP
Page 161
Enabling SNMP
The SNMP Global Page provides fields for globally enabling and configuring SNMP on the device.
To enable SNMP:
1. Click SNMP > Global. The SNMP Global Page opens:
Figure 108:SNMP Global Page
The SNMP Global Page contains the following fields:
• Local Engine ID (9-64 Hex Characters) — Displays the engine number.
• Use Default — Restores default SNMP settings, using the Local Engine ID.
• Enable SNMP Notifications — Indicates if SNMP traps are enabled for the device. The possible values are:
– Checked — Traps are enabled.
– Unchecked — Traps are disabled.
• Enable Authentication Notifications — Indicates if notification messages are issued if unauthorized
connection attempts occur. The possible values are:
– Checked — Notifications are issued.
– Unchecked — Notifications are not issued.
2. Define the fields.
3. Click Apply. The global SNMP settings are saved and the device is updated.