beautypg.com

Allied Telesis x610 Series Layer 3 User Manual

Page 73

background image

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide

73

All Countries: Install product in accordance with local and

National Electrical Codes.

E8

Circuit Overloading: Consideration should be given to the

connection of the equipment to the supply circuit and the effect

that overloading of circuits might have on overcurrent protection

and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this

concern.

E21

Caution:

Risk of explosion if battery is replaced by an incorrect

type. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.


Attention:

Le remplacement de la batterie par une batterie de

type incorrect peut provoquer un danger d’explosion. La

remplacer uniquement par une batterie du même type ou de

type équivalent recommandée par le constructeur. Les batteries

doivent être éliminées conformément aux instructions du

constructeur.

E22

Warning:

Mounting of the equipment in the rack should be such

that a hazardous condition is not created due to uneven

mechanical loading.

E25

Warning:

This unit might have more than one power cord. To

reduce the risk of electric shock, disconnect all power cords

before servicing the unit.

E30

If installed in a closed or multi-unit rack assembly, the operating

ambient temperature of the rack environment may be greater

than the room ambient temperature. Therefore, consideration

should be given to installing the equipment in an environment

compatible with the manufacturer’s maximum rated ambient

temperature (Tmra).

E35

Caution:

Installation of the equipment in a rack should be such

that the amount of air flow required for safe operation of the

equipment is not compromised.

E36

Warning:

Reliable earthing of rack-mounted equipment should

be maintained. Particular attention should be given to supply

connections other than direct connections to the branch circuits

(e.g., use of power strips).

E37