Allied Telesis AT-SBx31CFC960 - Manual (Page 211)

211
Chapter 10
Verifying the Hardware Operations of
the Chassis
This chapter describes how to verify the operations of the chassis and how
to run the Easy Startup application. The chapter contains the following
sections:
 “Using the LEDs to Verify the Chassis” on page 212
 “Using Local Management to Verify the Chassis” on page 214
 “Running the Easy Startup Application” on page 218
Note
Allied Telesis recommends that you use both the LEDs and local
management to confirm the initial operations of the chassis,
controller cards, and Ethernet line cards.