Allied Telesis AT-TQ Series - Manual (Page 87)

AT-TQ Wireless Access Point Series User’s Guide
87
7. Click the Update button to activate and save your changes on the
access point.
The access point tests for unknown access points when you click the
Update button and, if it finds an unknown device, enters an event
message in the event log and sends the message to the syslog server.
The access point repeats the test at the next time interval.
Disabling Event
Messages for
Unknown Access
Points
To stop the access point from generating event messages when it detects
unknown access points, perform the following procedure:
1. Select Pre-Configured Rogue AP from the Manage menu.
The access point displays the “Configure Pre-Configured Rogue AP
window” shown in Figure 27 on page 86.
2. Click the DIsabled dialog circles for the AP Detection for Radio
options. Radios 1 and 2 are for the 2.4 and 5 GHz radios, respectively.
The access point stops generating event messages for unknown
access points.