Allied Telesis AT-TQ Series - Manual (Page 167)

AT-TQ Wireless Access Point Series User’s Guide
167
Enabling or Disabling the Reset Button
This section explains how to enable or disable the Reset button on the rear
panel of the access point. The Reset button is used to restore the default
settings to the device. The default setting for the button is enabled.
If the unit is installed in a non-secure area, you might disable the button to
prevent unauthorized individuals from pressing it and disrupting the
operations of your wireless network.
Note
If you disable the Reset button and forget the manager account
password, you will not be able to manage the unit with the web
browser interface.
To enable or disable the Reset button, perform the following procedure:
1. From the Maintenance menu, select Configuration.
The access point displays the “Manage this Access Point’s
Configuration” window in Figure 54 on page 163.
2. In the To Disable RESET Button section of the window, click the Yes
dialog circle to disable the button or the No dialog circle to enable it.
3. Click the Update button to activate and save your changes on the
access point.