Allied Telesis AT-TQ Series - Manual (Page 64)

Chapter 3: Manage Menu
64
WEP Keys Enter up to four WEP keys in the fields
numbered 1 to 4. The key length and type
settings determine the length and format
of the keys. The order of the keys has be
the same on the access point and clients.
Here are the guidelines for ASCII keys:
An ASCII key may contain upper and
lower characters and the numbers 0 to 9.
An ASCII key is case-sensitive.
The key length of 64 bits requires five
ASCII characters.
The key length of 128 bits requires 13
ASCII characters.
Here are the guidelines for hexadecimal
keys:
A hexadecimal key may contain the letters
A to F and numbers 0 to 9.
The key length of 64 bits requires 10
hexadecimal characters.
The key length of 128 bits requires 26
hexadecimal characters.
Table 5. Static WEP (Continued)
Field Description