Allied Telesis AT-TQ Series - Manual (Page 126)

Chapter 5: Status Menu
126
Viewing Neighboring Access Points
You can view basic information and statistics about other access points
within range of the access point you are managing by selecting the
Neighboring Access Points option from the Status menu. The window is
shown in Figure 38.
Figure 38. View Neighboring Access Points Window
You may use the AP Detection for Radio options in the window to
configure the table to display the neighboring access points discovered on
one or both radios. Use the Update button to save your change.
The information in the table is not retain when the access point is reset or
powered off. The columns in the table are described in Table 19.
Table 19. Neighboring Access Point Settings Window
Column Description
Beacon Int. Displays the beacon interval of the
neighboring access point.