Allied Telesis AT-TQ Series - Manual (Page 44)

Chapter 3: Manage Menu
44
Table 2. Modify Wireless Settings Window
Field Description
Radio On Off Enables or disables the radio. The
selections are described here:
- On: Enables the radio. You have to
enable a radio before you can configure
its parameter settings.
- Off: Disables the radio. This is the
default setting.
MAC Address Displays the MAC address of the radio.
This value cannot be changed
Mode Specifies the Physical Layer (PHY)
standard of the radio. The available
modes depend on the radio and country.
The modes are:
- IEEE 802.11a: The access point accepts
only 802.11a clients.
- IEEE 802.11b/g: The access point
accepts only 802.11b and 802.11g clients.
- IEEE 802.11a/n: The access point
accepts only 802.11a and 802.11n clients
operating at 5 GHz. This is the default
setting for the 5 GHz radio.
- IEEE 802.11b/g/n: The access point
accepts 802.11b, 802.11g, and 802.11n
clients operating at 2.4 GHz. This is the
default setting for the 2.4 GHz radio.
- 2.4 GHz IEEE 802.11n: The access
point accepts only 802.11n clients
operating at 2.4 GHz.
- 5 GHz IEEE 802.11n: The access point
accepts only 802.11n clients operating at
5 GHz.