Allied Telesis AT-TQ Series - Manual (Page 162)

Chapter 7: Maintenance Menu
162
Restoring the Default Settings to the Access Point
This procedure explains how to restore the default settings on the access
point. Please review the following information before performing the
procedure:
 The manager name and password are reset to “manager” and
“friend”, respectively.
 If the access point has a static IP address, the address is deleted
and the DHCP client is activated. If the device does not receive a
response from a DHCP server on the LAN port, it uses the default
IP address 192.168.1.230.
Note
The access point stops forwarding network traffic when it is returned
to its default settings because the default setting for the radios is off.
To activate the default settings on the access point, perform the following
procedure:
1. From the Maintenance menu, select Configuration.
The access point displays the “Manage this Access Point’s
Configuration” window shown in Figure 54 on page 163.