Allied Telesis AT-TQ Series - Manual (Page 107)

AT-TQ Wireless Access Point Series User’s Guide
107
Viewing the Wireless Clients of a Cluster
You may view information about the wireless clients of the access points
of the cluster by selecting Sessions from the Cluster menu. This displays
the “Manage sessions associated with the cluster” window. An example of
the window is shown in Figure 31. The table lists the access points of the
cluster and their wireless clients. Access points that do not have any
wireless clients are not included in the table.
Figure 31. Manage Sessions Associated with the Cluster Window
The columns in the table are defined in Table 12.
Table 12. Manage Sessions Associated with the Cluster Window
Column Description
AP Location Identifies the access point by its cluster
location. The location is defined in the
“Manage access points in the cluster”
window,” explained in “Creating or Adding
Access Points to a Cluster” on page 102.
User MAC Displays the MAC addresses of the
wireless clients of the access point.
Idle Displays the amount of time
(milliseconds) a wireless client has not
sent or receive packets.
Rate Displays the speed (Mbps) at which the
access point is transmitting packets to a
client.