Allied Telesis AT-TQ Series - Manual (Page 113)

AT-TQ Wireless Access Point Series User’s Guide
113
Viewing the Neighboring Access Points of the Cluster
To view the neighboring access points of the cluster, select Wireless
Neighborhood from the Cluster menu to display the “View neighboring
access points” window. An example of the window is shown in Figure 34.
Figure 34. View Neighboring Access Points Window
The table rows are divided into three sections:
 The top row contains the IP addresses, MAC addresses, and
cluster locations of the radios in the access points of the cluster. A
radio has to be both enabled and active to be included in the row.
Radios that are disabled or enabled but not active are not included
in the window. To learn the MAC addresses of the radios of an
access point, refer to “Configuring Basic Radio Settings” on
page 43.
 The second set of rows contains the SSIDs of the VAPs on the
access points that are members of the cluster.
 The third set of rows displays the SSIDs of access points or VAPs
that are not members of the cluster, but that have been detected by
cluster members. The second and third sets of rows are divided by
a heavy line.