Allied Telesis AT-TQ Series - Manual (Page 61)

AT-TQ Wireless Access Point Series User’s Guide
61
No Security The None security level is intended for VAPs with wireless clients that do
not require encryption or authentication. This is the default setting.
IEEE 802.1x
Security
The guidelines for IEEE 802.1x security are listed here:
 This security method requires an external RADIUS server capable
of EAP.
 The authentication server must have Protected EAP (PEAP) and
MSCHAP V2 to support Windows clients.
 The clients and VAPs must use the same authentication method.
The IEEE 802.1x security parameters are shown in Figure 11 and
described in Table 4.
Figure 11. 802.1x Authentication for VAPs
Table 4. IEEE 802.1x
Field Description
RADIUS IP Address Enter the IPv4 address of the primary
RADIUS server.
Secondary RADIUS IP
Address Enter the IPv4 address of the secondary
RADIUS server. This field is optional. The
access point sends authentication
requests to this address if the primary
RADIUS server does not respond to
requests.