Enabling or disabling the leds, Figure 46: control leds window – Allied Telesis AT-TQ Series User Manual

Page 150

Text mode
Original mode

Chapter 6: Services Menu

150

Enabling or Disabling the LEDs

You may turn off the LEDs on the front panel of the access point when you
are not using them to monitor or troubleshoot the device. The default
setting for the LEDs is on.

To turn the LEDs on or off, perform the following procedure:

1. From the Services menu, select LED.

The unit displays the “Control LEDs” window, shown in Figure 46.

Figure 46. Control LEDs Window

2. Click the On dialog circle to turn on the LEDs and Off to turn them off.

3. Click the Update button to activate and save your changes on the

access point.