Allied Telesis AT-TQ Series - Manual (Page 63)

AT-TQ Wireless Access Point Series User’s Guide
63
Static WEP The parameter settings for static WEP security are shown in Figure 12 and
defined in Table 5.
Figure 12. Static WEP Encryption for VAPs
Session Key Refresh Rate
(Range: 0 - 86400) Specify the refresh rate for the session
(unicast) key for the clients of the VAP.
The range is 0 to 86400 seconds. The
default is 0 seconds. The value 0 disables
the refresh rate so that the unicast key is
not refreshed.
Table 4. IEEE 802.1x (Continued)
Field Description
Table 5. Static WEP
Field Description
Transfer Key Index Select the key the access point should
use to encrypt network traffic.
Key Length Select the key length of 64 or 128 bits.
The default is 128 bits.
Key Type Select whether the key is ASCII or
hexadecimal. The default is hexadecimal.