Allied Telesis AT-TQ Series - Manual (Page 100)

Chapter 4: Cluster Menu
100
match the settings of the units in the existing cluster and then joins
the cluster.
 The access points of a cluster must be assigned a name. The
name must be the same on all the units.
 You may create more than one cluster in a subnet by giving the
clusters different names.
 You may manage the access points by starting a management
session on any unit in the cluster.
 You may not combine the cluster and WDS bridge features on the
access points.
 The cluster feature on the AT-TQ Access Point Series is not
compatible with similar features on products from Allied Telesis or
other companies.
 The Country setting must be the same on the access points in a
cluster and must be set before the devices are added to a cluster.
For instructions, refer to “Setting the Country Setting” on page 41.
 The access points use encryption to protect the parameter settings
when they transmit them to each other.