Allied Telesis AT-TQ Series - Manual (Page 155)

AT-TQ Wireless Access Point Series User’s Guide
155
Configuring the Maximum Number of Active Management Sessions
This procedure explains how to configure the maximum number of active
management sessions the access point supports at one time. The range is
one to ten sessions. The default is one session. You might want to
consider increasing the parameter if the access point will be managed by
more than one person.
The maximum number of active management sessions applies to HTTP
and HTTPS sessions. It does not apply to SNMP.
To configure the maximum number of active management sessions,
perform the following procedure:
1. From the Services menu, select HTTP/HTTPS.
The access point displays the “Configure Web Server Settings”
window. Refer to Figure 47 on page 151.
2. Select the dialog box for Maximum sessions and enter the new value.
The range is 1 to 10 management sessions.
3. Click the Update button to activate and save your change on the
access point.