Allied Telesis AT-TQ Series - Manual (Page 40)

Chapter 3: Manage Menu
40
Enabling or Disabling Broadcast Ping Replies
You may configure the access point to either ignore or reply to ICMP echo
requests to IP broadcast addresses, also referred to as broadcast pings.
To configure broadcast ping replies, perform the following procedure:
1. From the Manage menu, select Ethernet Settings.
The access point displays the “Modify Ethernet (Wired) settings”
window in Figure 7 on page 36.
2. In the Directed Broadcast ICMP Reply field, do one of the following:
 If you want the access point to respond to broadcast pings, click
the Enabled dialog circle.
 If you do not want the access point to respond to broadcast pings,
click the Disabled dialog circle.
3. Click the Update button to activate and save your changes on the
access point.