Allied Telesis AT-TQ Series - Manual (Page 49)

AT-TQ Wireless Access Point Series User’s Guide
49
Channel Specifies the radio channel. The available
channels vary by radio, mode, and
country. Here are the guidelines:
- The Auto setting, the default setting, sets
the channel automatically. The access
point selects the channel with the least
traffic. This is the default setting.
- You can set the channel manually using
the Channel pull-down menu.
- The Auto selection is not available when
automatic channel reassignment in the
cluster feature is activated, as explained
in Chapter 4, “Cluster Menu” on page 93.
- If you select Auto, you may use the
Eligible Channels parameter to restrict the
channels from which the access point
may choose.
- You must set the channel manually if you
are using the Wireless Distribution
System (WDS) bridge feature, as
explained in “Managing Wireless
Distribution System Bridges” on page 71.
Eligible Channels Specifies the available channels when the
channel is selected automatically. This
selection is unavailable when the channel
is selected manually. The available
channels vary by radio, mode, and
country. To deselect a channel, click its
dialog box to remove the check mark. The
default is all available channels.
Table 3. Modify Radio Settings Window (Continued)
Parameter Description