Allied Telesis AT-TQ Series - Manual (Page 57)

AT-TQ Wireless Access Point Series User’s Guide
57
Broadcast/Multicast Rate
Limiting Enables or disables rate limiting of
broadcast and multicast packets. Here are
the guidelines
- To activate rate limiting, click the dialog
box to add a check mark. To deactivate
rate limiting, click the box to remove the
check mark. The default setting is
disabled.
- The Rate Limit parameter defines the
maximum number of broadcast and
multicast packets per second of the
access point. The parameter has a range
of 1 to 50 packets per second. The default
is 50 packets per second.
- The Rate Limit Burst parameter allows
intermittent bursts of traffic on the access
point above the rate limit. The default is
75 packets per second.
- The Rate Limit Burst parameter must be
greater than the Rate Limit parameter.
Table 3. Modify Radio Settings Window (Continued)
Parameter Description