Allied Telesis AT-TQ Series - Manual (Page 41)

AT-TQ Wireless Access Point Series User’s Guide
41
Setting the Country Setting
You should set the country setting of the access point as soon as you
install the unit. This ensures that the device operates in compliance with
the codes and regulations of your region or country.
Note
Changing the country setting of the access point disables both
radios. Consequently, this procedure is disruptive to the operations
of your network if the unit is actively forwarding network traffic.
To set the country setting, perform the following procedure:
1. Select Wireless Settings from the Manage menu.
The access point displays the “Modify wireless settings” window,
shown in Figure 8.
Figure 8. Modify Wireless Settings Window
2. Select the Country pull-down menu and select your country or region.