Allied Telesis AT-TQ Series - Manual (Page 67)

AT-TQ Wireless Access Point Series User’s Guide
67
Table 6. WPA Enterprise
Field Description
WPA Versions Select the WPA version. The options are
listed here:
- WPA: Select this option if all the wireless
clients of the VAP support WPA, but not
WPA2.
- WPA2: Select this option if all the clients
support WPA2, but not WPA. This is the
default setting.
- Both WPA and WPA2 - Select both
options if the VAP has both WPA and
WPA2 clients.
- Enable-pre-authentication: Select this
option if the VAP has WPA2 clients and
you want the access point to share the
pre-authentication packets from the
clients with other access points. This can
speed up authentication for roaming
clients who connect to multiple access
points. This option does not apply to WPA
clients.
Cipher Suites Select the cipher suite for the VAP, The
options are listed here:
- TKIP
- CCMP (AES)
- Both TKIP and CCMP (AES)
When both TKIP and CCMP (AES) are
selected, clients configured to use WPA
with RADIUS must have one of the
following:
- A valid TKIP RADIUS IP address and
RADIUS key.
- A valid CCMP (AES) IP address and
RADIUS key.
RADIUS IP Address Enter the IPv4 address of the primary
RADIUS server.