Allied Telesis AT-TQ Series - Manual (Page 106)

Chapter 4: Cluster Menu
106
Removing an Access Point from a Cluster
To remove an access point from a cluster, perform this procedure:
1. Start a management session on the unit.
2. Select Access Points from the Cluster menu.
The access point displays the “Manage access points in the cluster”
window, shown in Figure 29 on page 102.
3. Click the Stop Clustering button.
The access point is no longer a member of the cluster and has to be
managed as an individual unit. The device retains the cluster settings,
but any new changes are not transferred to other access points.