Allied Telesis AT-TQ Series - Manual (Page 48)

Chapter 3: Manage Menu
48
Table 3. Modify Radio Settings Window
Parameter Description
Mode Specifies the Physical Layer (PHY)
standard of the radio. The available
modes depend on the radio and country.
The modes are:
- IEEE 802.11a: The access point accepts
only 802.11a clients.
- IEEE 802.11b/g: The access point
accepts only 802.11b and 802.11g clients.
- IEEE 802.11a/n: The access point
accepts only 802.11a and 802.11n clients
operating at 5 GHz. This is the default
setting for the 5 GHz radio.
- IEEE 802.11b/g/n: The access point
accepts 802.11b, 802.11g, and 802.11n
clients operating at 2.4 GHz. This is the
default setting for the 2.4 GHz radio.
- 2.4 GHz IEEE 802.11n: The access
point accepts only 802.11n clients
operating at 2.4 GHz.
- 5 GHz IEEE 802.11n: The access point
accepts only 802.11n clients operating at
5 GHz.