Allied Telesis AT-TQ Series - Manual (Page 46)

Chapter 3: Manage Menu
46
Configuring the Radio Settings
To configure the parameter settings of the 2.4 and 5 GHz radios, perform
the following procedure:
1. From the Manage menu, select Radio.
The management software displays the “Modify radio settings
window,” shown in Figure 9 on page 47.
2. From the Radio pull-down menu, select a radio. Options 1 and 2 are
the 2.4 and 5 GHz radios, respectively. The default is radio 1. You can
configure only one radio at a time.
3. To activate a radio, click the On dialog circle for the Status option. You
cannot configure a radio when its status is off. To deactivate a radio,
click the Off dialog circle.
4. Configure the radio parameters, which are defined in Table 3 on
page 48.
5. When you are finished configuring the parameters, click the Update
button to activate and save your changes on the access point.