Allied Telesis AT-TQ Series - Manual (Page 112)

Chapter 4: Cluster Menu
112
Disabling
Automatic
Channel
Assignments
To disable automatic channel assignments on the access points of a
cluster, perform the following procedure:
Note
Disabling automatic channel assignments is shared among the
access points of the cluster. Disabling it on one unit disables it on all
units.
1. Select Channel Management settings from the Cluster menu.
The access point displays the “Automatically manage channel
assignments” window. An example of the window is shown in Figure
33 on page 110.
2. Click the Stop button.
The access points of the cluster stop performing automatic channel
assignments, but the radios retain their current channel assignments.