Allied Telesis AT-TQ Series - Manual (Page 31)

AT-TQ Wireless Access Point Series User’s Guide
31
Table 1. Review Description of this Access Point
Field Description
IP Address Displays the IP address of the access
point. For instructions on how to set the IP
address, refer to “Assigning a Static IP
Address to the Access Point” on page 36
or “Assigning a Dynamic IP Address from
a DHCP Server to the Access Point” on
page 38.
MAC Address Displays is the MAC address of the device
and radio 1. Radio 2 has a different MAC
address. You may not change the MAC
addresses of the device or radios.
Firmware Version Displays is the version number of the
management software on the access
point.
Build Number Displays the build number. This number
and the firmware version number identify
the management software.
Time since system-up Displays the amount of time since the unit
was reset or powered on.