Allied Telesis AT-TQ Series - Manual (Page 69)

AT-TQ Wireless Access Point Series User’s Guide
69
WPA Personal The options for WPA Personal are shown in Figure 14 and defined in
Table 7.
Figure 14. WPA Personal for VAPs
Broadcast Key Refresh
Rate (Range: 0 - 86400) Specify the refresh interval rate for the
broadcast (group) key. The range is 0 to
86400 seconds. The value 0 prevents the
key from being refreshed.
Session Key Refresh Rate
(Range: 0 - 86400) Specify the refresh interval rate for the
session (unicast) keys. The range is 0 to
86400 seconds. The value 0 prevents the
keys from being refreshed.
Table 6. WPA Enterprise (Continued)
Field Description
Table 7. WPA Personal
Field Description
WPA Versions Select the WPA version. The options are
listed here:
- WPA: Select this option if the VAP
wireless clients support WPA, but not
WPA2.
- WPA2: Select this option if the clients
support WPA2, but not WPA. This is the
default setting.
- Both WPA and WPA2 - Select both
options if the VAP has both WPA and
WPA2 clients.