Allied Telesis AT-TQ Series - Manual (Page 158)

Chapter 6: Services Menu
158
6. If the location of the access point observes daylight savings time, click
the dialog box for the Adjust Time for Daylight Savings parameter. The
window displays the fields in Figure 52.
Figure 52. Daylight Savings Time Fields
If the area does not observe Daylight Savings time, leave the dialog
box empty and go to step 10.
7. Use the pull down menus in DST Start to set the date and time for the
start of Daylight Savings time.
8. Use the pull down menus in DST End to set the date and time for the
end of Daylight Savings time.
9. Select the DST Offset field and enter the number of minutes to adjust
the time at the start and end of Daylight Savings time. The default is 60
minutes.
10. Click the Update button to activate and save your changes on the
access point.