Samsung SPH-M100SS-XAR - Manual (Page 58)

Section 6
50 Adjusting Volume
Changing Ringer Volume
To change the ringer volume, adjust the volume keys on the
side of your phone when the phone is in Standby mode.
To change the ringer volume from the main menu:
1. Press for Setup/Tool .
2. Press for Sounds .
3. Press for Ringer Volume .
4. Press for Calls , for Messages , or for
Alarms.
5. Press to set the ringer type for calls with Caller ID
or for calls no Caller ID information.
6. Press the scroll keys to select High + Vib , High , Med ,
Low 1-Beep , Vibrate , or Off.
7. When the desired ringer volume displays, press to
save the setting.
Silencing (or Muting) the Ringer
When the phone is open and ringing, press to
silence the ringer. When the phone is closed and
ringing, press
or one of the volume keys to
quickly silence the ringer.
You can also set the ringer to remain off. From Standby
mode, press the down volume key until “Ring Vol Off” is
displayed, or use the Main menu (see “Ringer type setting
for voice calls” on page xx).
To silence the ringer on incoming calls:
1. When the phone rings, press a volume key, or
.
2. Press or open the flip to answer the call.