Samsung SPH-M100SS-XAR - Manual (Page 116)

Section 14
108 Using the Voice Services of your Sprint PCS Phone
Voice-activated dialing
Your Sprint PCS Phone features voice-activated dialing.
When on the Sprint PCS Nationwide Network, you can call
up to 20 stored entries by speaking the name into the
microphone. Using the voice-activated dialing option
requires that you first program the phone to recognize the
name of the person you are calling.
Tips on recording names
ᮣ
Avoid recording similar names phonetically. If you
record a similar name to one that is already stored in a
voice-dial memory, the phone requests another name.
ᮣ
Avoid recording in a noisy place.
ᮣ
Speak clearly and naturally.
ᮣ
Avoid very long or very short names. Names with two to
five syllables are recommended.
ᮣ
If a voice dial entry does not properly connect, you may
need to record the name and number again.
Programming the Phone
For Voice-activated Dialing
Programming your Sprint PCS Phone for voice-activated
dialing is easy. The phone provides voice prompts and
screen displays to guide you through the recording process.
To program the phone for voice-activated dialing:
1. From the main menu press for Voice Dial .
2. Press for Record . The phone will prompt you to
say the name you want to program.
3. Wait for the beep and then say the name. For best
results, use names with at least two syllables, or use
both a first and last name. The phone stores the name
as a “first” sample, and then prompts you to say the
name again.
Note:
Train Voice Dial tags in a
quiet environment and
without the aid of an
accessory (for example,
a headset or hands-free
car kit). For voice-
activated dialing in
hands-free mode, refer
to the optional HFC 600
hands-free car kit
manual.