Samsung SPH-M100SS-XAR - Manual (Page 26)

Section 2
18 Getting to Know your Sprint PCS Phone™
Installing the Battery
Your Sprint PCS Phone comes with a LiIon battery. Follow
these steps to install it:
1. Hold the battery so that the metal contacts on the base
of the battery line up with the metal contacts on the
base of the phone.
2. Place the battery on the back of the phone with the top
of the battery about 1/4 inch to 1/2 inch from the
battery latch.
3. Gently push the battery toward the top of the phone
until it snaps into place.
Removing the Battery
To remove your battery follow these easy steps:
1. Power off your phone by briefly pressing the key.
2. Press the battery release latch (see illustration) and
slide the battery away from the latch.
battery
release
metal
contacts