Outback Power Systems MATE2 System Controller and Display Installation and User Manual - Manual (Page 82)

82
WEEKDAY QT START
adj hour 12:00A
DOWN INC DEC
WEEKDAY QT START
adj min 12:00A
INC DEC DONE
ADV/MATE/AGS/QT------------------
weekday: 12:00A
quiet time start
DOWN AGS CHANGE
Weekday Stop
and adjust the weekday start
hours. When finished, press the soft
key.
and adjust the weekday start min-
utes. When finished, press the soft key.
This will return you to the ADV/MATE/AGS/QT
weekday quiet time start menu.
Press the soft key to go to the weekday
quiet time stop screen.
weekday quiet time stop is the end of the quiet
time period for Monday-Friday. To change the
time, press the soft key and adjust
the hour and minute settings on the next screens
using the and soft keys. Proceed
through the adj hour and adj min screens in the
same manner described in the Weekday Start
section. Press the soft key on the final
ADV/MATE/AGS/QT weekday quiet time stop
screen to open the weekend screens.
ADV/MATE/AGS/QT------------------
weekday 12:00A
quiet time stop
DOWN AGS CHANGE