Outback Power Systems MATE2 System Controller and Display Installation and User Manual User Manual
Page 115
![background image](/manuals/407181/115/background.png)
115
ADV/FX/INVERTER----P00
low battery 21.0 vdc
cut-out set point
DOWN INC DEC PORT
ADVANCED MENU
FX
INVERTER
MAIN--------------------------
6:54:42P
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely effect
system performance
ADV/PASSWORD-----------
enter the password:
132
ENTER INC DEC EXIT
ADV----------------------------
choose device:
FX CC DC MATE
ADV/FX/PAGE1-------------
choose category:
ADV INV CHGR PG2
ADV/FX/INVERTER----P00
search 8 cycles
pulse length
DOWN INC DEC PORT
ADV/FX/INVERTER—-P00
search 60 cycles
pulse spacing
DOWN INC DEC PORT
ADV/FX/INVERTER----P00
search 6
sensitivity
DOWN INC DEC PORT
ADV/FX/INVERTER—-P00
low battery 25.0 vdc
cut-in set point
DOWN INC DEC PORT
ADV/FX/INVERTER—-P00
adjust 120 vac
output voltage
DOWN INC DEC PORT
ADV/FX/INVERTER---------
reset FX to factory
defaults
DOWN MORE
ADV/FX/INVERTER--P00
choose fx port
then press next
EXIT PORT NEXT
ADV/FX/INVERTER----P00
press button 1
Ready
EXIT 1 2
ADV/FX/INVERTER--P00
press button 1
Done
EXIT 1 2
ADV/FX/INVERTER-------
reset FX to factory
defaults
DOWN MORE
ADV/FX/INVERTER—-------
inverter programming
completed
TOP ADV MAIN
ADV/FX/INVERTER----P00
press button 2
Ready
EXIT 1 2
SETUP/MATE/PAGE3-------
choose category:
PG2 BEEP MAIN
SETUP/MATE/BEEP--------
button beep tone: OFF
BACK OFF ON
SETUP/MATE/PAGE2-------
choose category:
PG1 SUMRY COMM PG3
SETUP/MATE/PAGE3-------
choose category:
PG2 BEEP MAIN
FX CHARGER
ADV/FX/CHARGER---P00
charger 12.0 aac
limit
DOWN INC DEC PORT
ADV/FX/CHARGER--------
absorb 28.8 vdc
setpoint
DOWN INC DEC PORT
ADV/FX/PAGE1-------------
choose category:
ADV INV CHGR PG2
ADV/FX/CHARGER---P00
absorb 1.0 hrs
time limit
DOWN INC DEC PORT
ADV/FX/CHARGER---P00
float 27.2 vdc
setpoint
DOWN INC DEC PORT
ADV/FX/CHARGER----P00
float 1.0 hrs
time period
DOWN INC DEC PORT
ADV/FX/CHARGER----P00
refloat 25.0 vdc
setpoint
DOWN INC DEC PORT
ADV/FX/CHARGER----P00
equalize 28.8 vdc
setpoint
DOWN INC DEC PORT
ADV/FX/CHARGER----P00
equalize 1.0 hrs
time period
DOWN INC DEC PORT
ADV/FX/CHARGER------
charger programming
completed
TOP ADV MAIN
FX GRID
ADV/FX/PAGE1-------------
choose category:
ADV INV CHGR PG2