Outback Power Systems MATE2 System Controller and Display Installation and User Manual - Manual (Page 71)

71
On the ADV menu, push the soft key.
Press the soft key on the
MATE> screen.
ADV------------------------------------
choose device:
FX CC DC MATE
ADV/MATE--------------------------
choose category:
HBX GRIDUSE AGS PG2
ADV/MATE/GRIDUSE---------------
griduse enable: Off
DOWN ADV OFF ON
ADV/MATE/GRIDUSE---------------
weekday 12:00A
griduse start time
DOWN UP CHANGE
NOTE: Set all the weekday and weekend timing first before turning the GRID-USE Mode on.
The GRID-USE settings can be accessed by pressing the soft key.
The first GRID-USE screen to appear is the
griduse enable screen. This screen turns GRID-
USE mode ON or OFF.
This setting is the time during the week (Monday–
Friday) that a USE will be issued to the FX system,
allowing it to connect to the AC input source.
The time displayed is the default setting. To
change the time on the adj hour screen, press the
soft key
Weekday Grid-Use Start