beautypg.com

Introduction, Mate at a glance – Outback Power Systems MATE2 System Controller and Display Installation and User Manual User Manual

Page 7

background image

7

Introduction

The OutBack Power Systems MATE serves several functions:

• Displays and configures the system and its components—the FX Series Inverter/Charger,

the FLEXmax 80 and FLEXmax 60 Charge Controllers*, and the FLEXnet DC

• Coordinates system operation, maximizes performance, and prevents multiple products

from conflicting

• Permits adjustments of your power system through a series of convenient display screens,

which allow switching among different components, viewing the status of each and

changing settings

* MX60 Charge Controller—remote controls the AUX function and displays, but does not

control, all other functions

When connected to an OutBack HUB communications manager, a single
OutBack MATE can:

• Link to as many as ten FX Series Inverters/Chargers, OutBack Charge Controllers and

additional future OutBack Power System products.

• Issue a global Bulk or EQ recharging command which includes the Charge Controller’s

charging function.

This manual will show step-by-step use of the OutBack MATE to best run a power system.

MATE At a Glance

Yellow Status Indicator,

AC Input LED

“Hot Key”

AC Input Button

LCD Display

Four “Soft” Keys

or Buttons to scroll the

menus and change values.

Green Status Indicator,

Inverter LED

“Hot Key”

Inverter Button

MAIN-------------------------
1:35:04p
SUM STATUS SETUP ADV

This manual is related to the following products: