Set up the mate – Outback Power Systems MATE2 System Controller and Display Installation and User Manual User Manual
Page 21
21
Set Up the MATE
Start with the screen, which appears
after the power-up screens, and press the
Press the
This screen displays the MATE’s code version and
leads to the CLOCK display, CONTRAST (CNT),
and GLOW or back lighting.* Press the
soft key for a second screen of SETUP choices.
Press the
screen, SETUP/MATE/PAGE1. This screen
leads to the SUMMARY (SUMRY) screens,
which control how information is displayed. The
COMMUNICATION (COMM) screens display
MATE communication options.* Press the
soft key to advance to the next SETUP screen.
*For SUMMARY screens, please see pages 27-29.
See pages 33-37 for COMMUNICATION screens.
PAGE 3 allows the user access to the BEEP
function (the noise made when any key is
pressed). See page 26 to activate or deactivate this
function. Press the first soft key twice to return to
the CLOCK function.
Note: To return the MATE to its factory
default settings, please see page 100.
MAIN---------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP-------------------------------
choose device:
FX MATE
SETUP/MATE/PAGE 1--------------
mate code rev: 4.1.3
choose category:
CLOCK CNT GLOW PG2
SETUP/MATE/PAGE2--------------
choose category:
PG1 SUMRY COMM PG3
SETUP/MATE/PAGE3--------------
choose category:
PG2 BEEP MAIN
PRESS TWICE